Vertical Blind Master Carrier Wand Tilt Control - Right Side
Product ID: 6284 SKU: Z-0103
Master Carrier Wand Tilt Controller for some Kirsch, Levolor and Louverdrape vertical blinds.
The imprinted "L" on this master carrier indicates it is used on vertical blinds that stack to the left. This master carrier installs on the right side of your left stack vertical blinds.
||One wand tilt mechanism.
|Tilt Rod Shape
|Tilt Rold Size
|How is Tilt Mechanism Operated?
|Side Used On
||Installs on the right side of a left stack blind
|Country of Manufacture
||1 Business Day
||Colorado Springs, CO
|Eligible for Free Shipping on Orders Over $100
|Eligible for a Return
Window coverings that use a standard operating lift, continuous cord, or bead chain loop systems are a strangulation hazard to kids.
Window coverings that operate with continuous cord or bead chain loops are a strangulation hazard to kids.
- Limiting access to cord or bead chain loop is a simple way to make these window covering safer for kids.
- Cords should be made as short as possible or 40% or less of the length of the window covering.
- Keep all cords separate and only use one tassel per cord.
- If your window covering uses cord condensers install within 3” of the cord lock.
- Install cord cleats at least 5 feet above the ground and wrap your cords around them every time you raise your window covering.
- Install safety washers to prevent hazardous loops from forming on blinds with accessible inner cords.
- Replace cord tilt mechanisms with wand tilt mechanisms.
- Limiting access to the cord or bead chain loop is a simple way to make these window covering safer for kids.
- Free hanging loops should be attached to the wall or floor using ANSI/WCMA compliant Tension Devices.
- If your loop already uses a tension device make sure that it is installed so that there is tension on the loop.
- Make sure that tension devices are installed securely to the wall or floor using the appropriate fasteners and anchors.
- For window coverings that use a size #10 bead chain you can replace your bead chain loop with a rigid bead chain restraining device.
- It is safest to replace corded window coverings with cordless window coverings with inaccessible cords (look for “Best for Kids” certification label), or remove corded window coverings.
- Move all cribs, beds, furniture, and toys away from corded window coverings, preferably to another wall. Children can climb furniture to reach cords.