Our office and warehouse will be closed for Thanksgiving from November 23rd through November 26th. - Learn More

Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)

Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)

Product ID: 4942

Regular price
$0.49 / Foot
Sale price
Unit price

You can attach our ¼” wide safety shroud tape to your existing roman and woven wood shades to prevent dangerous loops from forming on the back side of the shade and posing a strangulation risk to children and pets. Shroud tape works on roman and woven wood shades that have exposed cords on the back side of the shade.

To ensure that our shroud tape will work on your shade, your shade must meet the following requirements:
  • The rings, bars, battens or ribs on the backside of the shade must not be further than 7 ½” apart from each other.
  • The uppermost ring should not be further than 12” from the headrail.

To install shroud tape, remove your shade from the window and lay it out fully extended on a flat work surface. Untie the lift string from the bottom ring and pull them out of the rings up to the headrail. Then, tie the shroud tape to the uppermost ring on your shade. Feed the shroud tape down through each ring of the shade, tying it securely to each one. Next, weave the lifting cord in and out of each opening on the shroud tape until you reach the bottom. Tie the shroud tape and lift cord to the bottom-most ring. Repeat with each lift cord.
Note: We recommend tying the shroud cord around each ring, but you can sew the tape to the ring. Be sure to securely fasten them together. If the shroud tape comes undone from the ring, a dangerous loop could form.

Compatible with 0.9mm-1.8mm string sizes.

Available in white, vanilla, and camel colors.

Sold by the foot

For this item, the quantity ordered represents the number of feet, not the number of pieces. To order, enter the total number of feet you would like to purchase into the quantity box. 

Rollease part # CSS500W, CSS500V & CSS500320.

Product ID 4942
Sold By Foot
Material Polyester
What's Included One foot of shroud tape.
Blind Type Roman Shade, Woven Wood Shade
Brand Used by Multiple Brands
Product Line Used by Multiple Product Lines
Country of Manufacture
Processing Time 1 Business Day
Shipping Origin Colorado Springs, CO
Eligible for Free Shipping on Orders Over $100 Yes
Warranty Information 90 Days
Eligible for a Return Yes
Window coverings that use a standard operating lift system are a strangulation hazard to kids.

  • Limiting access to cord is a simple way to make these window covering safer for kids.

  • Cords should be made as short as possible or 40% or less of the length of the window covering.
  • Keep all cords separate and only use one tassel per cord.
  • If your window covering uses cord condensers install within 3” of the cord lock.
  • Install cord cleats at least 5 feet above the ground and wrap your cords around them every time you raise your window covering.
  • Install safety washers to prevent hazardous loops from forming on blinds with accessible inner cords.
  • Replace cord tilt mechanisms with wand tilt mechanisms.

  • It is safest to replace corded window coverings with cordless window coverings with inaccessible cords (look for “Best for Kids” certification label), or remove corded window coverings.

  • Move all cribs, beds, furniture, and toys away from corded window coverings, preferably to another wall. Children can climb furniture to reach cords.