Free Shipping on U.S. Order $150+

Contact Us Log In My Account

Identify Your Blind > Roman Shades > Clutches & Accessories > Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Back Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)
Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)

Safety Shroud Tape for Cord Operated Roman and Woven Wood Shades (By-the-Foot)

Product ID: 4942

$0.49 / Foot
$0.49
Color
White
Vanilla
Camel

You can attach our ¼” wide safety shroud tape to your existing roman and woven wood shades to prevent dangerous loops from forming on the back side of the shade and posing a strangulation risk to children and pets. Shroud tape works on roman and woven wood shades that have exposed cords on the back side of the shade.

To ensure that our shroud tape will work on your shade, your shade must meet the following requirements:
  • The rings, bars, battens or ribs on the backside of the shade must not be further than 7 ½” apart from each other.
  • The uppermost ring should not be further than 12” from the headrail.


To install shroud tape, remove your shade from the window and lay it out fully extended on a flat work surface. Untie the lift string from the bottom ring and pull them out of the rings up to the headrail. Then, tie the shroud tape to the uppermost ring on your shade. Feed the shroud tape down through each ring of the shade, tying it securely to each one. Next, weave the lifting cord in and out of each opening on the shroud tape until you reach the bottom. Tie the shroud tape and lift cord to the bottom-most ring. Repeat with each lift cord.
Note: We recommend tying the shroud cord around each ring, but you can sew the tape to the ring. Be sure to securely fasten them together. If the shroud tape comes undone from the ring, a dangerous loop could form.

Compatible with 0.9mm-1.8mm string sizes.

Available in white, vanilla, and camel colors.

Sold by the foot

For this item, the quantity ordered represents the number of feet, not the number of pieces. To order, enter the total number of feet you would like to purchase into the quantity box. 

Rollease part # CSS500W, CSS500V & CSS500320.

Product ID 4942
SKU
Sold By Foot
Material Polyester
What's Included One foot of shroud tape.
Blind Type Roman Shade, Woven Wood Shade
Brand Used by Multiple Brands
Product Line Used by Multiple Product Lines
Country of Manufacture
Processing Time 1 Business Day
Shipping Origin Colorado Springs, CO
Eligible for Free Shipping on Orders Over $150 Yes
Warranty Information 90 Days
Eligible for a Return Yes
Window coverings that operate with continuous cord or bead chain loops pose a strangulation hazard to children.

  • Limiting access to the cord or bead chain loops is a simple way to make these window coverings safer for kids.

  • Free-hanging loops should be attached to the wall or floor using a tension device.
  • If your loop already uses a tension device, make sure that it is installed according to manufacturer specifications.
  • Make sure that tension devices are installed securely to the wall or floor using the appropriate fasteners and anchors.
  • Replace long loops with shorter ones.

  • It is safest to replace corded window coverings with cordless ones with inaccessible cords (look for the “Best for Kids” certification label) or remove them altogether.

  • Move all cribs, beds, furniture, and toys away from corded window coverings, especially in bedrooms and sleeping areas.

WARNING: