Video ID: 181019
How to Remove and Replace a Rollease Clutch Cover
Introduction
These instructions will show you how to both remove and replace the cover on your Rollease clutch. The clutch cover will need to be removed when the cord loop is replaced.
Tools Needed
Flat-head Screwdriver
Parts Needed
Step 1 – Pull the cord loop slightly to open the fabric.
- Using the flathead screwdriver, gently lift the tabs on the top of the cover up. Take care not to break the cover as they are fragile.
Step 2 – Replace the cover by placing the top tabs on the clutch first and then snapping the bottom into place.
- Pull the cord loop to test the cover’s installation.