
Hunter Douglas Cord & Chain Control End for PermaTrak Vertical Blinds
Product ID: 3231 SKU: VC-16
This set replaces the control end on Hunter Douglas PermaTrak vertical blind headrails that are operated with cord and chain.
The set includes the control end, the idle end, the cog gear, and two star fasteners/push nuts.
Compatible with size #6 bead chain.
Gray plastic.
Hunter Douglas part # 1019109.
Product ID | 3231 |
SKU | VC-16 |
Color | Grey |
Sold By | Set |
Material | Plastic |
What's Included | One outside cover, two screws, one idle end, one control end, one chain gear and two star fasteners/push nuts. |
How is Tilt Mechanism Operated? | Chain and Cord |
Side Used On | Both Left and Right Sides |
Blind Type | Vertical Blind |
Brand | Hunter Douglas, Alta, Custom Brands Group |
Product Line | PermAlign, Somner |
Country of Manufacture | Unknown |
Weight (Pounds) | 0.062 |
Processing Time | 1 Business Day |
Shipping Origin | Colorado Springs, CO |
Eligible for Free Shipping on Orders Over $100 | Yes |
Warranty Information | 90 Days |
Eligible for a Return | Yes |
Window coverings that use a standard operating lift, continuous cord, or bead chain loop systems are a strangulation hazard to kids.
- Limiting access to cord or bead chain loop is a simple way to make these window covering safer for kids.
- Cords should be made as short as possible or 40% or less of the length of the window covering.
- Keep all cords separate and only use one tassel per cord.
- If your window covering uses cord condensers install within 3” of the cord lock.
- Install cord cleats at least 5 feet above the ground and wrap your cords around them every time you raise your window covering.
- Install safety washers to prevent hazardous loops from forming on blinds with accessible inner cords.
- Replace cord tilt mechanisms with wand tilt mechanisms.
- Limiting access to the cord or bead chain loop is a simple way to make these window covering safer for kids.
- Free hanging loops should be attached to the wall or floor using ANSI/WCMA compliant Tension Devices.
- If your loop already uses a tension device make sure that it is installed so that there is tension on the loop.
- Make sure that tension devices are installed securely to the wall or floor using the appropriate fasteners and anchors.
- For window coverings that use a size #10 bead chain you can replace your bead chain loop with a rigid bead chain restraining device.
- It is safest to replace corded window coverings with cordless window coverings with inaccessible cords (look for “Best for Kids” certification label), or remove corded window coverings.
- Move all cribs, beds, furniture, and toys away from corded window coverings, preferably to another wall. Children can climb furniture to reach cords.