Hunter Douglas Cord Joiner for Mini, Wood and Faux Wood Blinds
Product ID: 4778
Condenses two or more lift cords into a single pull cord.
Holds up to four 1.4mm, 1.6mm, or 1.8mm cords and one 2.2mm pull cord.
For use with mini blinds, wood blinds, faux wood blinds, and roman shades.
Sold individually.
Lift cords and pull cord are sold separately.
Available in several colors.
Hunter Douglas part # 7007736XXX.
A note on safety: Condensers should be installed within three inches of the cord lock when the blind is in the fully lowered position. Use cord cleats to wrap up exposed lifting cords, keeping them away from kids.
Product ID | 4778 |
SKU | |
Sold By | Piece |
Material | Plastic |
What's Included | One cord condenser. |
Blind Type | Mini Blind, Wood / Faux Wood / Venetian Blind |
Brand | Used by Multiple Brands |
Product Line | Used by Multiple Product Lines |
Country of Manufacture | |
Processing Time | 1 Business Day |
Shipping Origin | Colorado Springs, CO |
Eligible for Free Shipping on Orders Over $150 | Yes |
Warranty Information | 90 Days |
Eligible for a Return | Yes |
- Limiting access to the cord or bead chain loops is a simple way to make these window coverings safer for kids.
- Cords should be made as short as possible.
- Keep all cords separate, putting only one cord in each tassel.
- If your window covering uses cord condensers, install them within 3” of the cord lock.
- Install cord cleats at least 5 feet above the ground, and wrap your cords around them every time you raise and lower your window covering.
- Install safety washers to prevent hazardous loops from forming on blinds with accessible inner cords.
- Replace cord tilt mechanisms with wand tilt mechanisms.
- It is safest to replace corded window coverings with cordless ones with inaccessible cords (look for the “Best for Kids” certification label) or remove them altogether.
- Move all cribs, beds, furniture, and toys away from corded window coverings, especially in bedrooms and sleeping areas.