Champion Tilt Control for Vertical Blinds
Product ID: 5611 SKU: TILTER-508
Wand tilt control used in certain vertical blinds. Common on Champion brand self-aligning vertical blinds.
White plastic. Comes with two very small screws for attaching the tilt mechanism to the first carrier.
||One wand-driven tilt mechanism and two screws.
Used by Multiple Brands
Used by Multiple Product Lines
|Country of Manufacture
||1 Business Day
||Colorado Springs, CO
|Eligible for Free Shipping on Orders Over $100
|Eligible for a Return
Window coverings that use a standard operating lift, continuous cord, or bead chain loop systems are a strangulation hazard to kids.
Window coverings that operate with continuous cord or bead chain loops are a strangulation hazard to kids.
- Limiting access to cord or bead chain loop is a simple way to make these window covering safer for kids.
- Cords should be made as short as possible or 40% or less of the length of the window covering.
- Keep all cords separate and only use one tassel per cord.
- If your window covering uses cord condensers install within 3” of the cord lock.
- Install cord cleats at least 5 feet above the ground and wrap your cords around them every time you raise your window covering.
- Install safety washers to prevent hazardous loops from forming on blinds with accessible inner cords.
- Replace cord tilt mechanisms with wand tilt mechanisms.
- Limiting access to the cord or bead chain loop is a simple way to make these window covering safer for kids.
- Free hanging loops should be attached to the wall or floor using ANSI/WCMA compliant Tension Devices.
- If your loop already uses a tension device make sure that it is installed so that there is tension on the loop.
- Make sure that tension devices are installed securely to the wall or floor using the appropriate fasteners and anchors.
- For window coverings that use a size #10 bead chain you can replace your bead chain loop with a rigid bead chain restraining device.
- It is safest to replace corded window coverings with cordless window coverings with inaccessible cords (look for “Best for Kids” certification label), or remove corded window coverings.
- Move all cribs, beds, furniture, and toys away from corded window coverings, preferably to another wall. Children can climb furniture to reach cords.